Socket - 30mm 12 Point
1/2" drive. You'll run into this socket application when changing axles on some VW / Audi. Example MK4 Golf/Jetta/NewBeetle front axle nut.
1/2" drive. You'll run into this socket application when changing axles on some VW / Audi. Example MK4 Golf/Jetta/NewBeetle front axle nut.
1/2" drive. You'll run into this socket application when changing axles on some VW / Audi.
Strut Spreader Tool. For opening and closing front strut housing on MK4 /MK5 /MK6 /MK7 VW and Audis. 5.5mm width. Each.
For removing plastic oil sump drain plug on the latest MK7+ etc VWs. Oil drain plug part # is 06L103 801. Oil drain tool.
9/16"x18, 7/16"x20, 1/2"x20
M14x1.5, M12x1.25, M12x1.50, M12x1.75, M14x2,
Adjustable timing bar. Audi A6 A8.
To hold camshafts at TDC when replacing timing belt.
AUDI: A6, A8, S4, ALLROAD (95-04) 80 (91-96), A4 (94-99), C...
For removing and installing the nut inside front strut mounts on VW MK2 / MK3 cars. MADE IN USA.
Drive 1/2" , aprox M16 size. Impact quality. Specifically for removing and installing transmission drain plug on triple star style plugs. Many modern ...
Drive 1/2" , M18. Impact quality.
For removing and installing transmission drain plug on triple star style plugs.
Many modern VW and Audi applications...
6 Piece Set. Most modern VW and Audi use these drivers in numerous locations in numerous sizes. This set has all required. Found in applications like ...
Most modern VW and Audi use these drivers in numerous locations in numerous sizes.
Sizes in 1/4" drive : M4, M5, M6
Sizes in 3/8" drive : M8, M9, M10,...
Distance centre to centre of big holes : aprox 51.5 cm. For AFC engine code. Same use as vw tool # 3243
For use on engine codes: AFC, AHA, ATQ. Same use as vw tool # 3242.
For removing and installing the sealing ring for the fuel tank sender flange.
Application: VW, AUDI A8.VW Touareg 2003, VW Touran 2004, Passat 2006, ...
2.0L TFSI, 3.2L FSI, 4.2L FSI. Also works on many other VAG auto appliations including timing gears, intermediate shaft gears, etc etc. Very handy t...
Specialty tool for removing the bolt on the back axle of modern Audi/VW. M18. 1/2" drive. 78mm long.
Used for installing and removing wheel bearings on cars without removing the steering knuckle and strut assembly.
Ross-Tech Hex-Net ENTHUSIAST version. WiFi & USB Interface. Works on maximum of 10 vehicles. For full product details please visit www.ross-tech.com
Pages: |