Vanagon Early Fuel Filter Upgrade (C1VANEARLYFF)
Early Vanagon Ga Fuel Filter Upgrade. Many 1984 and older Vanagons came with the small capacity square plastic fuel filter. This kit allows you to re...
Early Vanagon Ga Fuel Filter Upgrade. Many 1984 and older Vanagons came with the small capacity square plastic fuel filter. This kit allows you to re...
Nice quality nylon lanyard featuring new screen printed Concept-1 logo. New shorty version !
VW 1.9L TDI ALH. This version does NOT require you to remove the valve cover ! Camshaft alignment tool. Camshaft lock tool.
Flywheel locking tool for VW 1.9L TDI.
Locks from the top of the transmission. Drops into the "8" shaped inspection hole.
17mm, 19mm, 21mm sockets with 1/2" drive. Specifically for install and removal of wheel bolts, with protective sleeves to prevent damage to your wheel...
Special tool and socket to remove and install the clutch type pulley on Bosch alternators. Typically when you replace your alternator you are require...
For setting left and right camshafts on 3.0L V6 engine.
Includes camshaft and crankshaft setting and locking tools, camshaft sprocket adjusting tool ...
Double pin wrench with 3mm pins spaced 18mm apart at 15degree offset. Used for adjusting belt tension on many VW motors including MK4 2.0L, MK3 2.0L, ...
VW/AUDI cam chain tensioner locking tool. Fits many 1.8T / 30v V6, 2.7T.
SIZE : M14 x P1.5
VW TOOL # REFERENCE T40069.
Fits VW / Audi Engines :
2.5L 5cyl ( BGP, BGQ, BPR, BPS, CBTA & CBUA )
3.2L V6 4v ( BKH & CALA )
CONCEPT-1. 2 wrenches. 100mm length. And 140mm lenght. Both are 1/2" socket size & 24mm end.
For rolling front or rear fenders. Allow more clearance for larger/wider wheels and tires.
14 pieces. 1/2" drive, 55mm length.
Hex metric mm : 5, 6, 7, 8, 10, 12, 14mm
Torx : T30, T40, T45, T50, T55, T60, T70.
CONCEPT-1. Set of low profile impact stockets. CR-MO. Sockets are 1/2" drive and 28mm tall. Includes : 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21...
CONCEPT-1. Oil filter housing drain tool. Thread into the bottom of the oil filter housing to easily and cleanly drain the dirty oil before removing ...
For removal of those stubborn oxygen sensors that tend to seize into place on your exhaust system.
Pinion nut tool for 6V T1 trans and early swing axle.
Nut itself not included.
Pinion nut tool, late. Fits Late T1, 002, 091, 094 and Syncro front diff.
For nut with 15 "teeth"
Can be used with C-1TL-PIN-Hold, or other holdin...
Pinion nut tool. For the early style of pinion nut with 16 "teeth".
See images for style of nut.
Used in conjunction with C-1TL-PIN-HOLD tool, or ...
Pages: |