Die Grinder

HAZET.

Drift Pin Set - 5 Piece

HAZET. 3 4 5 6 8 mm

Inspection Mirror

HAZET. Mirror tilts back and forth remotely with roller on hand pad, light built in as well.

Machinist's Hammer - Hickory

HAZET.

Mobile Work Bench 179W-5

HAZET. Tools NOT included. SIZE : H 970 x W 1150 x D 600 mm. 2 flat and 3 high drawers. All corners protected by rubber edge protection. Wooden mult...

Optional Document Holder

HAZET. For 179 Series. (For HAZ179W-5 or HAZ179W-7)

Optional Drawer

HAZET. For 179 Series. (For HAZ179W-5 or HAZ179W-7)

Pneumatic Chair

HAZET. Movable chair with pneumatic seat height adjustment. Cushioned seat base. Easy to clean. Loading capacity up to 150 Kg. Adjustable height from...

Socket for CV Bolt Removal

HAZET. Made in Germany. Highest quality. 8mm or 5/16 "

Mounting axle shafts

Short design
With knurling
Surface: TIN coated (Titanium Nitride)
Drive:...

Toothed Belt Change Tool 3pc

HAZET.

Torx Socket Set 1/2"

HAZET.
E 10 E 12 E 14 E 16 , T 30 T 40 T 45 T 50 T 55

1.9L TDI Camshaft Align. Tool

VW 1.9L TDI ALH. This version does NOT require you to remove the valve cover ! Camshaft alignment tool. Camshaft lock tool.

1.9L TDI Flywheel Locking Tool

Flywheel locking tool for VW 1.9L TDI.

Locks from the top of the transmission. Drops into the "8" shaped inspection hole.

12 Point CV Bolt Socket

Tool - CV bolt removal socket - 12 pt hex triple square. 8mm. Used on VW Beetle, Bus, MK1, MK2, MK3, some MK4. CV joint socket. CV tool. Alternate too...

17mm Transmission Drain Socket

Tool for installing and removing 17mm hex style transmission drain plugs. 3/8" drive. Some applications include MK1, MK2, MK3, some MK4, and Aircooled...

3 Piece Wheel Bolt Sockets

17mm, 19mm, 21mm sockets with 1/2" drive. Specifically for install and removal of wheel bolts, with protective sleeves to prevent damage to your wheel...

36mm 6-point Oil Filter Socket

SCHWABEN. Low profile oil filter housing removal socket fits in tight places. Our 3/8-inch drive, 36mm, 6-point socket grips tight and won’t slip. W...

Alternator Clutch Pulley Tool

Special tool and socket to remove and install the clutch type pulley on Bosch alternators. Typically when you replace your alternator you are require...

Angled Fuel / Evap Clamp Plier

Audi Cam Adjustment Master Set

For setting left and right camshafts on 3.0L V6 engine.

Includes camshaft and crankshaft setting and locking tools, camshaft sprocket adjusting tool ...

Belt Tensioning Pin Wrench

Double pin wrench with 3mm pins spaced 18mm apart at 15degree offset. Used for adjusting belt tension on many VW motors including MK4 2.0L, MK3 2.0L, ...

Brake Caliper Screw Socket

1/2" drive. 10points, 15mm, 50mm length.

Brake Caliper Screw Socket 20m

1/2" drive. 10 points, 20mm, Length 50mm.

Brake Caliper Tool Set

Many VW and Audi rear brake calipers require the piston to be rotated and pushed at the same time to be pushed back into the caliper. This tool does e...